.

DC ל- DC מתח שלב למעלה למטה מודול אספקת החשמל מתכוונן זרם מתח אוטומטי בולך

DC ל- DC מתח שלב למעלה למטה מודול אספקת החשמל מתכוונן זרם מתח אוטומטי בולך

ILS 10.50

זמינות
המוצר זמין

מתח יציאה : אספקת חשמל מתח מתח DC ל- DC יכולה להיות אוטומטית של מדרגה או מתח יציאה מדרגה מתכוונן : זרם המתח BUCK Boost Converter פלט מתח קבוע/זרם קבוע, המתכוונן ברציפות. חומר פרימיום : אימץ PCB מצע אלומיניום עם מוליכות תרמית טובה. המרה גבוהה : אספקת החשמל של מדרגת המתח מגיעה עם יעילות המרה גבוהה, שיכולה להיות עד 90%. יישום : משמש בעיקר לכונן אור רחוב סולארי, כונן LED, אספקת חשמל לרכב, כוח טעינה סולארית, טעינה בסוללות וכו 'מתח יציאה : אספקת חשמל DC ל- DC DC יכולה אספקת חשמל אוטומטית או מתח פלט מדרגה. מתכוונן : זרם המתח BUCK Boost Converter פלט מתח קבוע/זרם קבוע, המתכוונן ברציפות. חומר פרימיום : אימץ PCB מצע אלומיניום עם מוליכות תרמית טובה. המרה גבוהה : אספקת החשמל של מדרגת המתח מגיעה עם יעילות המרה גבוהה, שיכולה להיות עד 90%. יישום : משמש בעיקר לכונן אור רחוב סולארי, כונן LED, אספקת חשמל לרכב, כוח טעינה סולארית, טעינה בסוללה וכו '. מפרט : מתח קלט : DC 10-36 V זרם כניסה : 5 A (מקסימום) מתח יציאה : DC 10-36 V ( מתח קבוע 2.5-36 V) זרם יציאה : 0-5 A (זרם קבוע 0.3-5 A) כוח פלט : 75 W (MAX) יעילות המרה : 88%-90%(קשור למתח קלט/יציאה) טמפרטורת הפעלה : -20 ~ 50 משקל : משוער.

מפרטים מוצהרים

Input Voltage:
DC 10-36V
Input Current:
5A(Max)
Output Voltage:
DC 10-36V (constant voltage 2.5-36V)
Output Current:
0-5A (constant current 0.3-5A)
Output Power:
75W(Max)
Conversion Efficiency:
88%-90%(related to input/output voltage)
Operating Temperature:
-20~50
Weight:
Approx. 47g/1.6oz
Module Instructions:
1. VIN+ is the input positive, and VIN- is the input negative.:
2. OUT+ is the output positive, OUT- is the output negative.:
3. Constant voltage adjustable range:
DC2.5V-36V (clockwise decrease, counterclockwise increase), please adjust no-load output voltage to what the load requires, then connect the load (You should adjust the constant current to the maximum at constant voltage mode).
4. Constant current adjustable range:
0.3A-5A (clockwise decrease, counterclockwise increase). First adjust no-load output voltage to what the load requires (No-load voltage should be 1-2V higher than load voltage ), adjust the current to minimum, then slowly adjust the current to what the load requires.
5. When the output exceeds 35W, please strengthen the heat dissipation.:
6. When using a switching power supply or other secondary power supply to power this module, please ensure that the power supply power is over twice of this module power.:
Package list:
1 * Step-Up Down Power Supply:
Note:
1. The input/output voltage and current must not exceed the maximum value during operation to avoid damage to the power supply.:
2. Pay attention to ventilation and heat dissipation when working for a long time to extend the service life of the power supply. :