.

מקודד פאפייסי, מקודד פיר מוצק, מקודד 3 פאזה 3000-6000 סל ד,1000 ב/1024 ב, ספק כוח מתח 5-24 וולט,

מקודד פאפייסי, מקודד פיר מוצק, מקודד 3 פאזה 3000-6000 סל ד,1000 ב/1024 ב, ספק כוח מתח 5-24 וולט,

ILS 0.67

זמינות
המוצר זמין

חבילת תוכן : 1 איקס מקודד, 3 איקס בורג, 6 איקס מכונת כביסה זה מוצק פיר מקודד הוא קטן בגודל, קל במשקל, קומפקטי במבנה וקל לנשיאה, חנות ולהתקין. גמיש צימוד חיבור, גמיש מחבר כדי למנוע נזק ישיר מקודד. מתאים לשימוש בסביבת עבודה מדויקת, אוטומציה משרדית ותחומי הנדסה. מתח עבודה : 5-24 וולט 30 קילו-הרץ, קוטר פיר 6 מ מ/0. מהירות מקיפה : 3000-6000 סיבובים לדקה. מפרט : סוג פריט : אנקודרם חומר : אלומיניום + פלסטיקפיר : קוטר : כ.2 אינץ ' מתח עבודה : 5-24 וולט מהירות מקיפה : 3000-6000 סיבובים לדקה תדר מקביל מקסימלי : 30 קילוהרץ מספר פולסים : 1000 ב/1024 מספר שלבים : אבז תלת פאזאורך כבל : בערך.7 רשימת חבילות : 1 איקס מקודד 3 איקס בורג 6 איקס כביסההערה : 1. מוצר זה מורכב של דיוק רכיבים, אז בבקשה להיות זהיר לא להפיל אותו. בעת ההתקנה, אם זווית האקסצנטריות או הסטייה גדולה מדי, היא תקצר את חיי השירות שלה. אין להשתמש בהשפעה חזקה, רטט, מאכל, שדה מגנטי גדול, טמפרטורה גבוהה, לחות גבוהה וסביבת בסיס חומצה. שגיאה במספר הפולסים עלולה להיגרם כאשר הכוח מופעל או כבוי. לאחר הפעלת הכוח, יש זמן עיכוב של 0. לאחר תיקון המוצר, אל תמשוך את הכבל בכוח העולה על 29. כאשר יש קו מתח גבוה או קו חשמל בקרבת מקום, אנא השתמש בצינור לכיסוי הכבל.

מפרטים מוצהרים

Item Type:
Encoder
Material:
Aluminum + Plastic
Shaft:
Diameter
Working Voltage:
5-24V DC
Comprehensive Speed:
3000-6000 rpm
Maximum Corresponding Frequency:
30KHZ
Number of Pulses:
1000B/1024B
Number of Phases:
ABZ three-phase
Cable Length:
Approx. 144mm / 5.7in
Package List:
1 x Encoder:
3 x Screw:
6 x Washer:
Note:
1. This product is composed of accuracy components, so please be careful not to drop it.:
2. When installing, if the eccentricity or deviation angle is too large, it will shorten its service life.:
3. Do not use in strong impact, vibration, corrosive, large magnetic field, high temperature, high humidity and acidbase environment.:
4. An error in the number of pulses may be caused when the power is turned on or off. After the power is turned on, there is a 0.5S delay time for use.:
5. After the product is fixed, do not pull the cable with a force exceeding 29.4N.:
6. When there is a highvoltage line or power line nearby, please use a conduit to cover the cable.:
7. When wiring, pay attention not to shortcircuit the terminals, and make sure that the wiring is correct. Wrong wiring will damage the internal circuit. It is recommended to insulate the unconnected terminals.:
8. Shielded wire should be grounded9. Do not disassemble the product by yourself. :